HD500
AC
Solutions
Cutting Tools & Mold Coating
2025-07-03
Coating Properites of HuaSheng at a Glance
| Model | NO. | Composition | Coulor | Thickness （um） |
Hardness （GPa） |
Residual stress （GPa） | Coe.of friction | Anti-oxidation temp.（℃） | Recommended applications | Processing range | |
| HA/MA | HPM221 | AlCrTiXN |  |
Golden yellow |
2.7±1 | 35±3 | -3.5±1 | 0.5 | 1100 | Milling inserts | Steel general |
| HE250 | AlTiSiN |  |
Bronze |
2.5±1 | 37±3 | -4.5±1 | 0.5 | 1100 | Milling and turning inserts |
Carbon steel,alloy steel |
|
| SH363 | AlTiN |  |
Iridescent |
24±1 | 36±3 | -4.0±1 | 0.5 | 1100 | Milling and turning inserts | High hardness steel<55 HRC | |
| HMT130 | AlTiSiXN |  |
Purple |
2.7±1 | 35±3 | -4.5±1 | 0.6 | 1100 | Milling and turning inserts | Stainless steel general | |
| SS330 | AlTISiN |  |
Red copper |
2.1±1 | 37±3 | -3.5±1 | 0.5 | 1200 | Turning inserts | General turning | |
| HLT401 | AlTiSiN |  |
Golden yellow |
2.8±1 | 37±3 | -3.5±1 | 0.5 | 1000 | Turning inserts | General turning | |
| HLM300 | AlTiN |  |
Black |
2.5±1 | 35±3 | -3.5±1 | 0.5 | 1000 | Milling and turning,end mills inserts | General | |
| HPR125 | AlCrN |  |
Grayish black |
2.5±1 | 34±3 | -3.5±1 | 0.5 | 1100 | End mills | Steel≤48HRC | |
| HHR110 | AlTiSiXN |  |
Bronze |
2.5±1 | 36±3 | -5.5±1 | 0.6 | 1200 | End mills | Steel≥50HRC | |
| HSR116 | TiB2-base |  |
Silver |
1.5±0.5 | 35±3 | -4.0±1 | 0.4 | 1100 | End mills | TC4 general | |
| HSR118 | ZrN-base |  |
Pale gold |
2±1 | 30±3 | -3.0±1 | 0.4 | 900 | End mills | TC4 rough machining | |
| AN510 | AlCrXN |  |
Grayish black |
2.0±0.5 | 37±3 | -4.5±1 | 0.4 | 1100 | End mills,taps | Carbon steel alloy steel, cast ion | |
| AN400 | AlCrXN |  |
Grayish black |
2.0±0.2 | 32±3 | -4.5±1 | 0.4 | 1100 | PCB,end mills,taps | PCB plate,mid-high TG plate,steel parts | |
| HPD124 | AlTiXN |  |
Black |
3.5±1 | 32±3 | -3.5±1 | 0.4 | 1100 | Drills | ≤45HRC steel parts, stainless steel | |
| HPD130 | AlTiSiXN |  |
Light bronze |
3.5±1 |
35±3 | -4.5±1 | 0.5 | 1100 | Drills | General drilling | |
| AP400 | AlCrN |  |
Grayish black |
3.0±1 | 34±3 | -4.0±1 | 0.4 | 1100 | Hobs | High hardness steel,steel parts,cast(low cutting speed,low hardness) | |
| HPG220 | AlCrXN |  |
Grayish black |
3.5±1 |
34±3 | -4.0±1 | 0.4 | 1100 | Hobs | High hardness steel,steel parts,cast(high cutting speed, high hardness | |
| MC | CT500 | AlTiSiN |  |
Purple |
3.9±1 | 34±3 | -2.0±1 | 0.4 | 1100 | Slotted blade | Carbon steel,ally steel |
| TC | TC200/500 | ta-C |  |
Iridescent |
0.35±0.05 | 45±3 | 一 | 0.1 | 500 | PCB,end mills,drills | PCB Al-substrate,Cu-AISi (Si<12%),woodworking |
| DA | HGR410 | C |  |
Brilliant black |
10.0±2 | 80-100 | 一 | 0.5 | 650 | End mills | Graphite,ZrO,carbide, ceramic |
| HFR410 | C | |
Brilliant black |
10.0±2 | 80-100 | 一 | 0.2 | 650 | PCB,end mills,drills | AlSi(Si>12%),composition, CFRP | |
| G4 |
F1 |
AlTiNHS |  |
Grayish black |
1±0.5 | 38±3 | -3.0±1 | 0.3 | 1100 | Highlighting mills | Carbon steel,alloy steel |
|
U1 |
AlTiNHS |  |
Grayish black |
3±1 | 38±3 | -3.0±1 | 0.3 | 1100 | General inserts,drills,taps |
Carbon steel,alloy steel, cast ion |
|
|
U2 |
AlTiNHS |  |
Grayish black |
6±1.5 | 38±3 | -3.0±1 | 0.3 | 1100 | All inserts | Carbon steel alloy steel,high hardness steel<55HRC,stainless steel,cast ion | |
|
U3 |
AlTiNHS |  |
Grayish black |
9±2 | 38±3 | -3.0±1 | 0.3 | 1100 | Cast ion milling inserts, roughing inserts | Carbon steel,alloy steel, cast ion | |
|
S1 |
AlTiSiNHS |  |
Bronze |
1±0.5 | 40±3 | -4.0±1 | 0.3 | 1200 | Highlighting mills | Carbon steel.alloy steel, high hardness steel<55HRC | |
|
S2 |
AlTiSiNHS |  |
Bronze |
2±1 | 40±3 | -4.0±1 | 0.3 | 1200 | Stainless steel turning,drills, end mills | Carbon steel.alloy steel, high hardness steel<55HRC | |
|
S3 |
AlTiSiNHS |  |
Bronze |
3±1 | 40±3 | -4.0±1 | 0.3 | 1200 | Stainless steel turning.drills, end mills | High hardness steel, stainless steel,cast ion,super alloy | |
|
R2 |
AlCrNHS |  |
Gray |
3±1 | 34±3 | -4.0±1 | 0.4 | 1100 | Taps,drills,round tools, end mills | Carbon steel,stainless steel, alloy steel,cast ion | |
|
T1 |
TiNHS |  |
Golden yellow | 4.5±1 | 32±3 | -3.0±1 | 0.3 | 900 | Taps | Carbon steel,alloy steel, cast ion | |
|
T5 |
AlCrTiNHS |  |
Golden yellow | 4±1 | 34±3 | -4.0±1 | 0.3 | 1100 | Taps | Carbon steel,alloy steel, cast ion | |
|
D1 |
AlCrSiNHS |  |
Bronze | 3.5±1 | 38±3 | -4.0±1 | 0.3 | 1100 | Drills | Carbon steel,alloy steel | |
Coating Process Recommendation Form
Coating Process Applications Recommendation
| Cutting Material |
Turning |
Milling |
Drilling |
Threading |
Gear Cutting |
||
| Inserts | Inserts | End mills/PCB | Drills/Reamers | Taps | Hobs | ||
| P | Carbon steel | CT500 (Slotted inserts) G4-F1(Components) G4-S1(Components) G4-U3(Steel cutting) | HLM300(General) HPM221 (Soft material) HE250(Bronze) G4-U2 | HLM300(General) HPR125 (Soft material) G4-U1 | HPD130(General) HPD124(High speed) G4-U1 G4-D1 | AN510(General) G4-T1 G4-T5 G4-R2 | AP400 HPG220 |
| Alloy steel | |||||||
| H | High hardness steel<55HRC | SH363(Iridescent) G4-U2 |
SH363(Iridescent) HE250(Bronze) G4-U2 |
HHR110(Bronze) G4-S2 |
HPD124 G4-S3 |
AN510(General) G4-S2 |
AP400 HPG220 |
| High hardness steel >55HRC | HE250(Bronze) G4-S3 |
HE250(Bronze) G4-S3 |
HHR110(Bronze) G4-S2 |
G4-S3 |
G4-S2 |
||
| M | 201/316/304 | HLM300(General) SS330(Purple) HMT130(Rough machining) G4-S3 G4-U2 |
HLM300(General) SS330(Purple) HLT401(Golden) G4-U2 |
HLM300(General) G4-S2 |
HPD130(General) HPD124(High speed) G4-S3 |
AN510(General) G4-S2 |
AP400 HPG220 |
| K | Cast ion | HLM300(General) G4-U2 | HLM300(General) G4-U2 | HLM300(General) G4-S2 | HPD130(General) HPD124(High speed) G4-U1 | AN510(General) G4-R2 G4-T1 G4-T5 | AP400 HPG220 |
| S | Titanium alloy | HLM300(General) G4-S3 | HLM300(General) HLT401(Golden) G4-U2 | HSR116(Silver) HSR118 (Champagne gold) HHR110(Bronze) G4-S2(Bronze) | HPD130(General) HPD124(High speed) G4-S3 | AN510(General) G4-S2 | |
| Super alloy | |||||||
| N |
Cu/AlSi(Si<12%) |
TC200/500 | TC200/500 | ||||
|
Cu/AlSi(Si>12%) |
HFR410 | TC200/500 | |||||
| Regular PCB | AN400/TC200 | ||||||
| PCB/CFRP | HFR410 | ||||||
| Graphite | HGR410 | ||||||